| 參考文獻 |
1.Martellotti M. E., “An Analysis of the Milling Process, “Transaction of ASME, Vol. 63, pp.677-700, 1941.
2.Martellotti M. E., “An Analysis of the Milling Process, Part 2: Down Milling, “Transaction of ASME, Vol. 67, pp. 233-251, 1945.
3.Koenigsberger, F. and Sabberwal, A. J. P., “An Investigation into the Cutting Force Pulsations During Milling Operations, “International Journal of Machine Tool Design and Research, Vol. 1, pp. 15-33,1961.
4.Sabberwal, A. J. P., “Chip Section and Cuting Force During the Milling Operation, “Annals of the CIRP, Vol. 10, pp. 197-203 , 1961.
5.Tlusty, J., and MacNeil, P., “Dynamics of Cutting Forces in End Milling, “CIRP annals, Vol. 24, pp. 21-25, 1975.
6.Melkote S. N. and Endres W. J., “The Importance of Including Size Effect When Modeling Slot Milling, “ ASME Journal of Manufacturing Science and Engineering, Vlo. 120, pp. 69-75, 1998.
7.Eneres W. J., DeVor R.E. and Kapoor S. G., “A Dual-Mechanism Approach to the Prediction of Machining Forces,” ASME Journal of Engineering for Industry, Vol. 117, pp. 526-541, 1995.
8.Geoffrey Boothroyd, “Fundamentals of Metal Machining and Machine Tools, 2nd printing,” CENTRAL BOOK COMPANY at Taipei, Taiwan, pp. 71.
9.Budak E., Altintas Y. and Armarego E. J. A., “Prediction of Milling Force Coefficients From Orthogonal cutting Data, “ ASME Journal of Manufacturing Science and Engineering, Vol. 118, pp. 216-224, 1998.
10.Yellowley, I., “Observations on the Mean Values of Forces, Torque and Specific Power in the Peripheral Milling Process,” International Journal of Machine Tool Design and Research, Vol. 25, No. 4, pp. 337-346, 1985.
11.Kline, W. A., DeVor, R.E., Snareef, I. A., “The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts, “ International Journal of Machine Tool Design and Research, Vol. 22, No. 1, pp. 7-22, 1982.
12.Wang J. J., “Convolution Modeling of Milling Force System and Its Application to Cutter Runout Identification, “ph.D. thesis, School of Mechanical Engineering, Georgia Institute of Technology, April, 1992.
13.Wang J. J. and Liang S. Y. and Book W. J., “Convolution Analysis of Milling Force Pulsation, “ASME Journal of Engineering for Industry, Vol. 116, pp. 17-25, 1994.
14.Wang J. J., Zheng C. M., “An analytical force model with shearing and ploughing mechanisms for end milling,” International Journal of Machine Tools & Manufacture, Vol.42, pp.761-771, 2002.
15.張煌權，包含側邊及底面犁切力之端銑及面銑力模式，國立成功大學機械研究所，九十年碩士論文.
16.Sutherland, J. W., Kulur, V. N., King, N.C., 2000, “An Experimental Investigation of Air Quality inWet amd Dry Turning”, Annals of the CIRP, 49/1:61-64.
17.Heisel, U., Lutz, M., Spath, D., Wassmer, R., Walter, U., 1994, “Application of Minimum Quantity Cooling Lubrication Technology in Cutting Processes”, Production Engineering, Vol.II/1:49-54.
18.Klocke, F., Eisenblatter, G., 1997, “Dry Cutting”, Annals of the CIRP, 46/2:519-526.
19.Wakabayashi, T., Sato H., Inasaki I., 1998, “Turning using Extremely Small Amount of Cutting Fluids”, JSME International Journal(Series C), 41/1, 143-148.
20.Wakabayashi, T., Inasaki I., Suda, S., Yokota H., 2003, “Tribological Characteristic and Performance of Lubricant Esters for semi-dry Machining”, Annals of the CIRP, 52/1:61-64.
21.Weinert, K., Inasaki, I., Sutherland, J. W., Wakabayashi, T., 2004, “Dry Machining and Minimum Quantity Lubrication”, Keynote Paper, Annals of the CIRP, 53/2:511-537.
22.Klocke, F., Eisenblaetter, G., 1997, “Machinability Investigation of the Drilling Process Using Minimum Cooling Lubrication Techniques”, Production Engineering, Vol.IV/1:19-24.
23.Aoyama, T., 2002, “Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication”, Annals of the CIRP. 51/1:289-292.
24.Kiyoshi Suzuki, Hu Bin Qun, Sholi Mishiro, Katsutoshi Tanaka, Tomoyasu Imai, Anurag Sharma, Tetsutaro Uematsu, Manabu Iwai, 2003, “Grinding Performance Improvement by a Special Coolant Superimposed with the Megasonic Vibration”, Key Engineering Materials Vols. 238-239 pp.183-188.
25.Oishi, K., “Built-up Edge Elimination in Mirror Cutting of Hardened
Steel,” J. of Engineering for Industry, Vol.117, pp.62-66, February, 1995.
26.Elbestawi, M. A., Chen, L., Becze, C. E. and El-Wardany, T. I., “
High-Speed Milling of Die and Molds in Their Hardened State,”
Annals of the CIRP, Vol.46, pp.57-62, 1997.
27.Ng, E-G. and Aspinwall, D. K., “The Effect of Workpiece Hardness
and Cutting Speed on the Machinability of AISI H13 Hot Work Die Steel When Using PCBN Tooling,” ASME Journal of Manufacturing Science and Engineering, Vol.124, pp.588-594, 2002.
28.鄭茗元，SKD61硬化模具鋼銑削特性之探討，國立成功大學機械工程研究所碩士論文，九十一年。
29.Ning, Yuan, Rahman, M. and wong, YS., “Investigation of chip formation in high speed end milling,” Journal of Material Processing Technology, Vol.113, pp.360-367, 2001.
|
