進階搜尋


   電子論文尚未授權公開,紙本請查館藏目錄
(※如查詢不到或館藏狀況顯示「閉架不公開」,表示該本論文不在書庫,無法取用。)
系統識別號 U0026-1109201717290500
論文名稱(中文) 以RFID為基礎醫院氣送系統追蹤定位之研究
論文名稱(英文) The Study of RFID Based Tracking and Positioning for Hospital Pneumatic Delivery System
校院名稱 成功大學
系所名稱(中) 生物醫學工程學系
系所名稱(英) Department of BioMedical Engineering
學年度 105
學期 2
出版年 106
研究生(中文) 陳義雄
研究生(英文) Yi-Syong Chen
學號 P86041150
學位類別 碩士
語文別 英文
論文頁數 40頁
口試委員 指導教授-鄭國順
口試委員-李嘉猷
口試委員-王士豪
口試委員-施東河
口試委員-黃基哲
中文關鍵字 射頻辨識  氣送系統  追蹤定位 
英文關鍵字 Radio frequency identification (RFID)  pneumatic delivery system  location tracking 
學科別分類
中文摘要 氣送系統在十九世紀時就已經被使用,但是到現在仍存在諸多問題。最常見的問題就是裝載物體的氣送子卡在管壁內使得系統癱瘓,而排除這些問題往往會花費許多人力與時間,使得氣送系統的使用效益降低。因此快速排除使系統癱瘓的問題便顯得重要。本研究提出利用無線射頻辨識(RFID)技術來追蹤以及定位氣送子來輔助在醫院的氣送系統。
本研究的設計是將超高頻的讀取器安裝在氣送子內部並將標籤放置在管壁外部,當氣送子在管壁內傳輸時會讀取到管壁外部之標籤,再透過無線網路將標籤的資訊傳送到後端資料庫。然後網頁平台顯示氣送系統的當前狀況以及提供使用者查詢氣送子的行經路徑。當氣送子卡在管壁時,可在距離最後讀取到的標籤3-5米內的範圍尋找氣送子,可以大幅節省人力與時間,並提高氣送系統的使用效益。
為了驗證系統在高速狀況下的可用性,本研究利用電動車來模擬高速的環境。從實驗結果得知目前的系統可以在每秒六公尺的速度下運行。由於網路或環境因素導致讀取的不穩定,透過程式的改良可以加以改善。未來可以實際結合醫院的氣送系統,利用醫院的網路系統來建立物聯網,讓醫院方便進行管理。
英文摘要 Although pneumatic tube system has been used since the late 19th century, there are many issues associated with it that need to be addressed. One of the most common problems is when the carrier gets stuck in the tubing system. The exhaustive search can be time consuming. This study proposes the use of radio frequency identification (RFID) technology to track and locate the carrier. The system can assist the pneumatic delivery system in hospital.
The design of this study is to install the UHF reader inside the carrier and place the tags outside the transport tube. When the carrier passes through the transport tube, it will read the tag outside the transport tube. Then tag information will send to the database via Wi-Fi. Then the website platform displays the current status of the pneumatic tube system and provides users to query the pathway of carrier. When the carrier stuck in the transport tube, user can find it at the 3-5 meters of last read tag. It can significantly save manpower and time, and improve the efficiency of pneumatic tube system.
In order to verify the availability of the system at high speed, this study uses electric car to simulate high-speed environments. From the experimental results that the current system can run at a speed of 6 meters per second. Moreover, due to network or environmental factors lead to read tag instability, through the improvement of the program can be improved. The future can be combined with the hospital's pneumatic tube system, use of the hospital's network system to establish the Internet of things.
論文目次 中文摘要 I
Abstract II
Acknowledgement IV
List of Tables V
List of Figures VI
Chapter1 Introduction 1
1.1 Pneumatic Tube System 1
1.1.1 Basic concepts 1
1.1.2 Applications of PTS 3
1.1.3 PTS in a medical center hospital in southern Taiwan 5
1.2 Radio Frequency Identification (RFID) System 6
1.2.1 Principle 6
1.2.2 Applications 9
1.3 Motivation and Purpose 10
1.3.1 Motivation 10
1.3.2 Purpose 11
Chapter2 Materials and Method 12
2.1 Locate method by using RFID 12
2.2 Tracking system design 15
2.2.1 Architecture 15
2.2.2 Hardware 16
2.2.3 code rule 22
2.2.4 Database of code information 23
2.2.5 User interface design 24
2.3 Experimental design 25
2.3.1 Static test 25
2.3.2 Dynamic test 27
Chapter 3 Result and Discussion 30
3.1 User Interface 30
3.2 Reading distance 31
3.3 Response time 33
3.4 Result of dynamic test 34
3.5 System improvement 35
Chapter 4 Conclusion and Prospects 36
4.1 Conclusion 36
4.2 Prospects 36
References 37
參考文獻 [1]"Pneumatic Networks". Museum of Retrotechnology. 23 July 2008. Retrieved 4 January 2016.
[2]"Gone with the wind: Tubes are whisking samples across hospital". Stanford School of Medicine. 2010-01-11. Retrieved 12 February 2010.
[3]explainthatstuff [Online]. Available: http://www.explainthatstuff.com/pneumatic-tube-transport.html
[4]sumetzberger [Online]. Available: https://www.sumetzberger.at/en/home/
[5]K. Domdouzis, B. Kumar, and C. Anumba, “Radio-Frequency Identification
(RFID) applications: A brief introduction,” Advanced Engineering Informatics,
vol. 21, no. 4, pp. 350–355, Oct. 2007.
[6]C. M. Roberts, “Radio frequency identification (RFID),” Computers & Security, vol. 25, no. 1, pp. 18–26, Feb. 2006.
[7]R. Want, “An introduction to RFID technology,” IEEE Pervasive Computing,
vol. 5, no. 1, pp. 25–33, Jan. 2006.
[8]David C. Wyld, Michael A. Jones, and Jeffrey W. Totten, “Where is my suitcase? RFID and airline customer service,” Mrkting Intelligence & Plan, vol. 23, no. 4, pp. 382–394, Jun. 2005.
[9]H.-J. Joo, M.-T. Cho, and H.-Y. Jeong, “RFID-based scale model freight car system allowing realtime quantity checking,” Multimed Tools Appl, vol. 76, no. 4, pp. 5985–6002, Feb. 2017.
[10]E. C. Jones and C. A. Chung, RFID in Logistics: A Practical Introduction. Boca Raton: CRC Press, 2007.
[11]M. Tajima, “Strategic value of RFID in supply chain management,” Journal of Purchasing and. Supply Management, vol. 13, no. 4, pp. 261–273, Dec. 2007
[12]R. Angeles, “Rfid Technologies: Supply-Chain Applications and Implementation Issues,” Information Systems Management, vol. 22, no. 1, pp. 51–65, Dec. 2005.
[13]Edmund Prater, Gregory V. Frazier, and Pedro M. Reyes, “Future impacts of RFID on e‐supply chains in grocery retailing,” Supp Chain Mnagmnt, vol. 10, no. 2, pp. 134–142, Apr. 2005.
[14]A. Sarac, N. Absi, and S. Dauzère-Pérès, “A literature review on the impact of RFID technologies on supply chain management,” International Journal of Production Economics, vol. 128, no. 1, pp. 77–95, Nov. 2010.
[15]M. Oner, A. Ustundag, and A. Budak, “An RFID-based tracking system for denim production processes,” Int J Adv Manuf Technol, vol. 90, no. 1–4, pp. 591–604, Apr. 2017.
[16]D. M. Segura Velandia, N. Kaur, W. G. Whittow, P. P. Conway, and A. A. West, “Towards industrial internet of things: Crankshaft monitoring, traceability and tracking using RFID,” Robotics and Computer-Integrated Manufacturing, vol. 41, pp. 66–77, Oct. 2016.
[17]L.-C. Wang, “Enhancing construction quality inspection and management using RFID technology,” Automation in Construction, vol. 17, no. 4, pp. 467–479, May 2008.
[18]L. Kumari, K. Narsaiah, M. K. Grewal, and R. K. Anurag, “Application of RFID in agri-food sector,” Trends in Food Science & Technology, vol. 43, no. 2, pp. 144–161, Jun. 2015.
[19]Peter Jones, Colin Clarke‐Hill, David Hillier, and Daphne Comfort, “The benefits, challenges and impacts of radio frequency identification technology (RFID) for retailers in the UK,” Mrkting Intelligence & Plan, vol. 23, no. 4, pp. 395–402, Jun. 2005.
[20]H.-T. Yeh, B.-C. Chen, and B.-X. Wang, “A City Parking Integration System Combined with Cloud Computing Technologies and Smart Mobile Devices,” Eurasia J. Math. Sci. Technol. Educ., vol. 12, no. 5, pp. 1231–1242, May 2016.
[21]D. Patron et al., “On the Use of Knitted Antennas and Inductively Coupled RFID Tags for Wearable Applications,” IEEE Transactions on Biomedical Circuits and Systems, vol. 10, no. 6, pp. 1047–1057, Dec. 2016.
[22]I. Jauregi et al., “UHF RFID Temperature Sensor Assisted With Body-Heat Dissipation Energy Harvesting,” IEEE Sensors Journal, vol. 17, no. 5, pp. 1471–1478, Mar. 2017.
[23]C.-H. Cheng and Y.-H. Kuo, “RFID analytics for hospital ward management,” Flex Serv Manuf J, vol. 28, no. 4, pp. 593–616, Dec. 2016.
[24]Y.-T. Liao, T.-L. Chen, T.-S. Chen, Z.-H. Zhong, and J.-H. Hwang, “The Application of RFID to Healthcare Management of Nursing House,” Wireless Pers Commun, vol. 91, no. 3, pp. 1237–1257, Dec. 2016.
[25]C.-H. Cheng and Y.-H. Kuo, “RFID analytics for hospital ward management,” Flex Serv Manuf J, vol. 28, no. 4, pp. 593–616, Dec. 2016.
[26]H. Y. Yu, J. J. Chen, and T. R. Hsiang, “Design and Implementation of a Real-Time Object Location System Based on Passive RFID Tags,” IEEE Sensors Journal, vol. 15, no. 9, pp. 5015–5023, Sep. 2015.
[27]L. Qiu, X. Liang, and Z. Huang, “PATL: A RFID Tag Localization based on Phased Array Antenna,” Scientific Reports, vol. 7, p. 44183, Mar. 2017.
[28]L. Shangguan, Z. Yang, A. X. Liu, Z. Zhou, and Y. Liu, “STPP: Spatial-Temporal Phase Profiling-Based Method for Relative RFID Tag Localization,” IEEE/ACM Transactions on Networking, vol. 25, no. 1, pp. 596–609, Feb. 2017.
[29]D. Zhang, L. T. Yang, M. Chen, S. Zhao, M. Guo, and Y. Zhang, “Real-Time Locating Systems Using Active RFID for Internet of Things,” IEEE Systems Journal, vol. 10, no. 3, pp. 1226–1235, Sep. 2016.
[30]Ching-Chao Chang and Wen-Tzu Chen “Implementation of RFID Anti-Collision Algorithm for EPCglobal Gen2 Protocol,” master thesis, NCKU, 2012 June.
[31]LinkSprite [Online]. Available: http://learn.linksprite.com/rfid/how-to-program-the-rfid-reader/
[32]Data Sheet-AS3992 UHF RFID Single Chip Reader [Online]. Available: http://media.digikey.com/pdf/data%20sheets/austriamicrosystems%20pdfs/as3992.pdf
[33]Peter Dave Hello's Blog [Online]. Available: https://www.peterdavehello.org/2016/02/raspberry-pi-3-out-what-is-the-difference-a-simple-comparison-chart-and-some-references/
[34]G. T. Wang 's Blog [Online]. Available: https://blog.gtwang.org/iot/raspberry-pi-3-model-b
[35]TOTOLINK [Online]. Available: http://www.totolink.tw/
[36]GS1 US [Online]. Available: https://www.gs1us.org/
[37]PhpMyAdmin [Online]. Available: https://www.phpmyadmin.net/
[38]Microsoft visual studio [Online]. Available: https://www.visualstudio.com/zh-hant/
[39]Microsoft ASP.NET [Online]. Available: https://www.asp.net
論文全文使用權限
  • 同意授權校內瀏覽/列印電子全文服務,於2017-09-13起公開。


  • 如您有疑問,請聯絡圖書館
    聯絡電話:(06)2757575#65773
    聯絡E-mail:etds@email.ncku.edu.tw