進階搜尋


 
系統識別號 U0026-0812200915290866
論文名稱(中文) 具曲面支撐之鞋底氣墊的研究
論文名稱(英文) Research on air-cushion shoe sole with structural support provided by curvature surface
校院名稱 成功大學
系所名稱(中) 工程科學系碩博士班
系所名稱(英) Department of Engineering Science
學年度 97
學期 2
出版年 98
研究生(中文) 黃英俊
研究生(英文) Ying-Chun Huang
電子信箱 homax@ms1.hinet.net
學號 n9889113
學位類別 博士
語文別 中文
論文頁數 145頁
口試委員 召集委員-陳澤生
口試委員-黃明哲
口試委員-黃登淵
口試委員-王宗一
口試委員-王榮泰
口試委員-趙隆山
指導教授-周榮華
中文關鍵字 鞋底  氣墊  曲面    支撐 
英文關鍵字 support  Shoe sole  rib  curvature  air cushion 
學科別分類
中文摘要 本研究主要探討3D曲面支撐鞋底氣墊與2.5D的氣墊結構差異度,模擬曲面氣墊實際可行之支撐結構設計,並以平面組合應力之原理,將氣墊上下平面與側表面,以整體之脊形肋架構連結,再做出初階樣品。本研究又將該曲面氣墊支撐結構之側曲面向上延伸,而賦予更高階之曲面結構設計。經測試發現,於相近之內部壓力下,初階樣品之能量回復率優於2.5D氣墊25%相對百分比,而代表吸震效果之減加速率則減少21.5 m/S2,且下降深度增加2mm。至於更高階之樣品,其能量回復率甚至優於2.5D氣墊48%相對百分比。作為曲面氣墊支撐架構之脊形肋氣墊結構,可經由模型簡化與數值分析,找出最佳化設計之結果,改善3D曲面氣墊設計之工作效率。
英文摘要 The main purpose of this research is to study the difference between 2.5D and 3D air cushion structures with a curved upper surface. Viable designs are evaluated and samples are made, following the principle of composite force to integrate the upper and sideward surfaces with connective ribs. The ribs also provide a supporting function for the air cushion. A higher lever air cushion was made through extending the sideward curved surface of the supporting rib to the height which has never been done. After inflated with approximate inner pressure, the test results for the first version of 3D air cushions show that the energy rebound are 25% relatively more than the 2.5D air cushion, which accompany with a better shock absorption function, including a descend acceleration of 21.5 m/S2 and an increase 2mm penetration height. The higher lever one even provide 48% relatively energy rebound more than the 2.5D air cushion. Optimal designs can be obtained through computer simulations for the rib structures of the 3D air cushion using simplified models which improve the design work considerably.
論文目次 摘要…………………………………………………………………………………Ⅰ
英文摘要……………………………………………………………………………Ⅱ
誌 謝………………………………………………………………….……………Ⅲ
目錄………... …………………………………………………………………..……Ⅳ
表目錄…………………………………………………………………………..……Ⅵ
圖目錄………………………………………………………………………………..Ⅶ
符號說明………………………………………………………………………..… ⅩⅤ
第一章 緒論………………………………………………………………..………1
1.1 研究動機與目的………………………………………………………1
1.2 文獻回顧………………………………………………………………2
1.3 先期研究………………………………………………………………6
1.4 本文架構…………………………………………………..…………15
第二章 理論分析與數值模………………………………………………………17
2.1氣墊原理…………………………………………………………………17
2.1.1 2又1/2D氣墊之探討……………………………………..……17
2.1.2 3D曲面氣墊結構之探討:……………………………………...30
2.2 基本公式…………………………………………………………...……36
2.2.1 線性彈簧與氣壓彈簧之剛性與儲蓄能量間之關係與比較……..36
2.2.2. 氣墊側表面支撐肋之應力與應變探討…………….……………39
2.2.3. 氣墊側表面支撐肋之應力與應變數值分析……………………42
2.2.4. 氣墊側表面支撐肋之應力與應變數值分析之綜整……………56
2.2.5. 氣墊下表面之應力與應變數值分析……………………………58
2.2.6 氣墊下表面之應力與應變數值分析之綜整……………….……73
2.2.7 氣墊上表面之應力與應變數值之分析……………….…………73
2.2.8 氣墊上表面之應力與應變分析結果之綜整……………………90
2.2.9 氣墊側表面之應力與應變之分析………………………………90
2.2.10 氣墊側表面之應力與應變之分析結果……………………..…93
2.2.11 氣墊整體組合單元之應力與應變之分析……………………..93
2.2.12 氣墊整體組合之應力與應變之分析結果……………………..98
2.2.13 M-3D氣墊支撐肋最佳化之應力與應變之分析結果(一)..….98
2.2.14. M-3D氣墊支撐肋最佳化之分析結果(一)之綜整…………..104
2.2.15. MX-3D氣墊整體組合最佳化之分析結果(二)………………106
2.2.16 MX-3D氣墊整體組合最佳化之分析結果(二)綜整…………109
2.3 3D氣墊設計原理……………………………………..………………109
2.3.1 3D氣墊設計參考………………………………...………………110
2.3.2 3D氣墊設計步驟………..………………………….……………110
第三章 試驗設備與方法………………………………………………..………….116
3.1 3D曲面氣墊之製造……………………………………....………….116
3.2 氣墊功能之測試……………………………………….……………..117
3.3 試驗的方法…………………………………………….……...……..120
第四章 實驗結果與討論…………………………………………….……………..122
4.1 實驗結果…………………………………………………...……………..122
4.2 討論…………………………………………………………...…………..129
4.2.1 2又1/2D與3D氣墊之差異…………………………..…………129
4.2.2本研究曲面氣墊(2009)3D 與(2008)3D氣墊之差異…………..….132
第五章 結論與建議………………………………………………………………......137
5.1研究結論……………………………………………………….….………137
5.2建議……………………………………...…………………………………138
參考文獻……………………………………………………………………..………...139
自述…………………………………………………………………………………… 145
參考文獻 1 I. C. Huang, “Air-cushioned shoe sole components and method of their manufacture” European patent number EP00215974B1(1987)
2 I. C. Huang, “Air cushion shoe sole” U.S. patent number 4,670,995(1987)
3 I. C. Huang, “Air cushion shoe sole” U.S. patent number 4,722,131(1987)
4 黃英俊,“具防爆氣嘴及裸露支撐設計之氣墊鞋氣墊”,臺灣新型專利49964號(1989)
5 I. C. Huang, “Removable pressure-adjustable shock-absorbing cushion device with an inflation pump for sporting goods” U.S. patent number 4,912,861(1988)
6 Y. J. Huang, “Inflatable cushion device” U.S. patent number 5,335,382(1994)
7 Y. J. Huang, “Inflatable cushion devices for bicycle seats and other sporting goods” U.S. patent number 5,558,395(1996)
8 黃英俊, “一種具立體支撐及緩衝避震效能之氣墊座體” ,臺灣新型專利公告00151301號(1991)
9 黃英俊, “具單面凹穴與立體支撐架構之緩衝護件及其組合結構” ,臺灣新型專利公告00179822號(1990)
10 黃英俊, “具防水及可調緩衝避震效能之箱具” , 臺灣新型專利公告00154057號(1991)
11 Y. J. Huang, “Shock-absorbing units interconnectable to form shock absorbtion function” U.S. patent number 5,238,231(1996)
12 黃英俊, “組合式氣墊單元體及其組成結構” , 臺灣新型專利公告00168252號(1991)
13 I. C. Huang, “Air cushion grip with a cubic supporting structure and shock-absorbtion function” U.S. patent number 5,355,552(1994)
14 I. C. Huang, “”Air Gripper” Brazilian Patent No. P19405895-4(1994)
15 I. C. Huang, “Air Cushion Grip With Pump” Chinese Patent No. ZL94191371.6(1994)
16 I. C. Huang, “ Air Gripper” European Patent No. 0687152(1994)
17 I. C. Huang, “Air cushion grip with a cubic supporting structure and shock-absorbing function” Canada Patent No. 2157507(1994)
18 黃英俊, “具立體支撐及緩衝效能之氣墊握把” , 臺灣新型專利公告00165426號(1991)
19 I. C. Huang, “Roller Skate Wheel Assembly” New Zealand Patent No. 307775(1998)
20 I. C. Huang, “Roller Skate Wheel Assembly” Mexican Patent No. 203744(1998)
21 I. C. Huang, “Roller skate wheel assembly” South Korea Patent No.486002(1998)
22 I. C. Huang, “Roller skate wheel assembly” European Patent No. EP0956114(1998)
23 I. C. Huang, “Roller skate wheel assembly” Chinese Patent No.96195249(1998)
24 黃英俊, “一種以氣墊兼具鞋內空氣調節之氣墊及其空氣調節鞋之結構” , 臺灣新型專利公告00134162號(1990)
25 黃英俊,“活動式氣囊鞋墊之改良構造” , 臺灣新型專利公告00254051號(1995)
26 黃英俊, “具單面凹穴與立體支撐架構之緩衝護件及其組合結構” ,臺灣新型專利公告00145300號(1992)
27 I. C. Huang, “Protective air cushion glove” U.S. patent number 6,065,150(2000)
28 I. C. Huang, “Removable pressure-adjustable shock-absorbing cushion device with an inflation pump for sporting goods” U.S. patent number 4,912,861(1988)
29 I. C. Huang, “Inflatable cushion device” U.S. patent number 5,335,382(1994)
30 黃英俊,“改良之緩衝墊”,臺灣新型專利公告00173484號(1991)
31 黃英俊,“具充氣幫浦之調壓式充氣鞋舌”,臺灣新型專利公告00149665號(1991)
32 I. C. Huang, “Double buffered air cushion assembly” U.S. patent number 5,902,660(1999)
33 I. C. Huang, “Cushion assembly with aligned air chambers”, U.S. patent number 6,537,639(2003)
34 黃英俊,“ “緩衝用子母氣墊” ,臺灣發明專利公告第00318139號(1997)
35 黃英俊,“緩衝用氣墊” ,臺灣發明專利公告第00321596號(1997)
36 I. J. Huang, “Comblnable sneaker with a replaceable male cushion”, U.S. patent number 5,907,911(1999)
37 I. J. Huang, “Combinable sneaker with Replaceable male Cushion”, Russian Patent No. 2169513(1999)
38 I. J. Huang, “Combinable sneaker with Replaceable male Cushion”, Chinese Patent No. ZL97182220.4(1999)
39 I. J. Huang, “Combinable sneaker with a replaceable male cushion”, Chinese Patent No.ZL98806289.5(1999)
40 I. J. Huang, “Combinable sneaker with a replaceable male cushion”, European Patent No.EP0991335(1999)
41 I. J. Huang, “Combinable sneaker with Replaceable male Cushion”, Australian Patent No. 729930(1999)
42 黃英俊, “組裝式運動鞋” ,臺灣發明專利公告第00316226號(1997)
43 I. J. Huang, “Combinable sneaker with a replaceable male cushion” ,European Patent No.EP0991335(1999)
44 I. C. Huang, “Self-inflatable air Cushion”, U.S. patent number 5,937,462(1999)
45 I. C. Huang, “Self-Inflatable Air Cushion” , Australia Patent No.740251(1999)
46 I. C. Huang, “Self-Inflatable Air Cushion” , Russian Federation Patent No. 2193857(1999)
47 I. C. Huang, “Self-Inflatable Air Cushion” , Chinese Patent No. ZL97182227.1(1999)
48 I. C. Huang, “Self-Inflatable Air Cushion”, European Patent No. EP0994659(1999)
49 I. C. Huang, “Vertically-movable blow molding apparatus”, U.S. patent number 5,069,611(1991)
50 I. C. Huang, “Method of manufacturing an air cushion”, U.S. patent number 5,925,306(1999)
51 I. C. Huang, “ Extrusion molding process and the related apparatus”, U.S. patent number 6,395,217(2002)
52 I. C. Huang, “Apparatus for extrusion molding utilizing clamping devices and means for releasing compressed air”, Chinese Patent No. ZL97182225.5(2002)
53 I. C. Huang, “Apparatus for extrusion molding utilizing clamping devices and means for releasing compressed air” , South Korea Patent No.502684(2002)
54 黃英俊, “塑膠押出機之垂直升降製造機構及其模具” ,臺灣新型專利公告00161478號(1991)
55 黃英俊,“異形押出成型之氣墊製造及其輔助元件” ,臺灣發明專利公告第00323982號(1998)
56 黃英俊, “自生壓力之製程及模具” ,臺灣發明專利公告第00346436號(1998)
57 I. J. Huang, “Air Cushion”, U.S. patent number 6,773,785(2004)
58 I. J. Huang, “3D Air Cushion” , Australian Patent No. 730553(2004)
59 I. J. Huang, “3D Air Cushion” , Eurasian Patent No. 001675(2004)
60 I. J. Huang, “3D Air Cushion” , Korea Patent No. 0342745(2004)
61 I. J. Huang, “3D Air Cushion” , New Zealand Letters Patent No. 501117(2004)
62 I. J. Huang, “3D Air Cushion” , Singapore Patent No. 68958(2004)
63 I. J. Huang, “3D Air Cushion” , Turkey Patent No. TR 1999 02947 B(2004)
64 I. J. Huang, ”3D Air Cushion” , China Patent No. ZL97182222.0(2004)
65 I. J. Huang, “ Three dimensional shoe vamp air cushion”, U.S. patent number 6,128,837(2000)
66 I. J. Huang, “Three Dimensional Structure Air Cushion For Shoe Tongue” , Russian Patent No. 2180792(2000)
67 黃英俊, “具立體三度空間之鞋舌氣墊” 臺灣發明專利公告第00320555號(1997)
68 I. C. Huang, “Protective Sports Eyeglasses With Buffer And Shock-Absorbing Function” , New Zealand Patent No.-502340(1999)
69 I. C. Huang, “Protective Sports Eyeglasses With Buffer And Shock-Absorbing Function”, Russian Patent No. 2197211(1999)
70 I. C. Huang, “Protective sports eyeglasses with buffer and shock-absorbing function” , Mexico Patent No.218,554(1999)
71 I. C. Huang, “Protective sports eyeglasses with buffer and shock- absorbing function” , Turkey Patent No.TR19990308B(1999)
72 I. C. Huang, “Protective sports eyeglasses with buffer and shock- absorbing function”, Chinese Patent No. ZL97182226.3(1999)
73 I. C. Huang, “Protective sports eyeglasses with buffer and shock-absorbing function”, South Korea Patent No.485878(1999)
74 I. C. Huang, “Protective Sports Eyeglasses With Buffer And Shock-Absorbing Function”, Australia Patent No.739479(1999)
75 黃英俊,“具緩衝吸震之運動用護目鏡” ,臺灣發明專利公告第00343918號(1998)
76 G. F. Butterfield, “Air cushion for foot and shoe soles,” U. S. Patent No. 259,092 (1882)
77 J. F. Bascom, “Pneumatic shoe sole” U. S. Patent No. 586,155 (1889)
78 L. L.Gilbert, “Pneumatic foot support” U. S. Patent No. 2,080,469 (1933)
79 M. F. Rudy, “Insole construction for articles of footwear” U. S. Patent No. 4,183,156(1980)
80 M. F. Rudy, “Footwear” U. S. Patent No. 4,219,945(1980)
81 M. F. Rudy, “Diffusion pumping apparatus self-inflating device” U. S. Patent No. 4,340,626(1982)
82 M. F. Rudy, “Load carrying cushioning device with improved barrier material for control of diffusion pumping” U. S. Patent No. 5,042,176 (1991)
83 H. W. Bonk , D. Goldwasser, “Shoe sole of gas-filled film with barrier layer of ethylene-vinyl alcohol copolymer and aliphatic polyurethane” U. S. Patent No. 6,730,379 (2004)
84 F. J. Dojan, , T. Foxen, J. F. Swigart, E. S.Schindler, “Article of footwear having a fluid-filled bladder with a reinforcing structure”, U. S. Patent No. 7,086,179(2007)
85 D. Katz, “Just Do It: The Nike Spirit in the Corporate World”, Adams Media Corporation, USA, 1995
86 Nike Air Max 360 Catalogue(2006)
87 亞太智財科技服務股份有限公司(禾懋企業股份有限公司授權引用),“可自動充氣之氣墊技術鑑價報告“,台北, 2006年2月
88 黃英俊, “氣墊鞋之過去現在與未來” ,臺灣鞋訊(1991年10月)
89 黃英俊,“氣墊領域耕耘” ,臺灣鞋訊(1994)
90 E. D.Cohen , A. R.Jones, L. Servadio,“Athletic shoe having inflatable bladder”, U. S. Patent No. 5,158,767(1992)
91 G. Oertel, “ Polyurethane Handbook”, 2nd, Hanser, New York, 1993
92 T. Jablonowski,J. Ahnemiller, “Stabilization of Millable Polyurethane Rubber,” Rubber World -AKRON-, 28, No.5, pp. 26 - 33, Rubber World, February 2008
93 R. W. Ogden, “Non-Linear Elastic Deformations”, Dover, New York, 1997
94 M. Mooney, “A Theory of Large Elastic Deformation,” Journal of Applied Physics, 11, pp. 582–592, September 1940
95 賴錠正, “風箱型橡膠氣墊開發及有限原素力學分析”-碩士論文¬-國立成功大學工程科學研究所(2000)
96 劉懿漢, “自行車避震氣墊之分析設計與製作”-碩士論文¬-國立成功大學工程科學研究所(2001)
97 李卓勳, “功能性護膝製程技術與其性能評估”-碩士論文¬-國立成功大學工程科學研究所(2007)
98 1996年SATRA 編號第15569/9601/4/O/D/MPW/DP號測試報告
99 H. J. Qi and M. C. Boyce, “Stress-strain behavior of thermoplastic polyurethanes”Mechanics of Material, 37 (2005), pp. 817-839, July 2004
100 M. M. Attard, “Finite Strain Isotropic Hyperelasticity,” International Jounarl of Solids and Structures, 40, pp. 4353–4378, August 2003
101 W. M. Lai, D. Rubin, E. Krempl, “Introduction to Continuum Mechanics”, 3rd, Butterworth- Heinemann, USA, 1999
102 MSC.Marc, “Nonlinear Finite Element Analysis of Elastomers: Technical Paper,” MSC.Software Corporation, USA, 2000
103 J. W. Beams, “Mechanical Properties of Thin Films of Gold and Silver,” in: Structure and Properties of Thin Films, (eds. Neugebauer, et al.), pp. 183 – 192, Willey, New York, 1959
104 Technical Data Sheet of ESTANE 58315 NAT 029/033
105 SATRA反彈測試之相關規範-PM142
106 1996年SATRA 編號第15569/9601/4/O/D/MPW/DP號測試報告
107 臺灣鞋業技術研究中心編號第 (97)97HTD001號測試報告
108 臺灣鞋業技術研究中心編號第(97)97HTD004號測試報告
109 臺灣鞋業技術研究中心編號第(97)9710096號測試報告
110 臺灣鞋業技術研究中心編號第(97)9710134號測試報告
111 臺灣鞋業技術研究中心編號第(98)9806158-A02號測試報告
112 臺灣鞋業技術研究中心20090702測試報告重測相關數據
論文全文使用權限
  • 同意授權校內瀏覽/列印電子全文服務,於2014-08-10起公開。
  • 同意授權校外瀏覽/列印電子全文服務,於2014-08-10起公開。


  • 如您有疑問,請聯絡圖書館
    聯絡電話:(06)2757575#65773
    聯絡E-mail:etds@email.ncku.edu.tw