進階搜尋


 
系統識別號 U0026-0812200915092672
論文名稱(中文) 應用模糊品質機能展開方法於專案計畫中模糊關鍵鏈排程之研究
論文名稱(英文) on the fuzzy critical chain in project scheduling by using fuzzy quality function development technique
校院名稱 成功大學
系所名稱(中) 航空太空工程學系碩博士班
系所名稱(英) Department of Aeronautics & Astronautics
學年度 97
學期 2
出版年 98
研究生(中文) 顏廷諭
研究生(英文) Ting-yu Yen
電子信箱 p4696119@mail.ncku.edu.tw
學號 p4696119
學位類別 碩士
語文別 英文
論文頁數 74頁
口試委員 口試委員-陳春志
指導教授-劉育釧
指導教授-楊世銘
中文關鍵字 模糊品質機能展開  模糊關鍵鏈排程  專案管理   
英文關鍵字 Project Management  Fuzzy Critical Chain  Fuzzy QFD 
學科別分類
中文摘要 專案計畫中時程管理受到各界的研究興趣,專案環境中不確定性和未知性經常導致專案延遲和/或成本額外的增加。這篇論文核心在應用模糊品質機能展開於模糊關鍵鏈排程。藉由考慮幾個專案不確定性:金錢、時間長短、作業開始時間、技術、人力、設備,去藉由模糊品質機能展開獲得作業的不確定程度,去定出作業時間模糊數建立模型和合理的緩衝時間的估算。分析結果指出本研究提出的方法專案長度和計畫評核術相比較縮短15%。整合模糊品質機能展開和模糊關鍵鏈排程是有效且有效率的在專案時程管理上。
英文摘要 Project scheduling management has long received many interests, where uncertainties and unknown factors in environment often cause project schedule delay and/or extra cost. This work aims at the application of fuzzy quality function deployment (QFD) method to fuzzy critical chain scheduling. By considering several project uncertainties: budget, time limit, activity begin time, technology difficulty, manpower, and facility requirement, fuzzy QFD is to obtain the degree of fuzziness, which defines the fuzzy model and buffer time for project activities. Analytical results show that the project time obtained from the proposed method can be reduced by 15% as compared to PERT scheduling. Integration of fuzzy QFD and fuzzy critical chain method is shown to be effective and efficient for project scheduling management.
論文目次 ABSTRACT………………………………………………………………………………......... i CONTENTS………………………………………………………………………………....... ii
LIST OF TABLES……………………………………………………………………............ iii
LIST OF FIGURES………………………………………………………………….............. iv

CHAPTER
I INTRODUCTION
1.1 Motivation...1
1.2 Literature Review...2
1.3 Scope and Outline...6
II CRITICAL CHAIN AND FUZZY QFD
2.1 Critical Chain Project Management...7
2.2 Fuzzy Set Theory...11
2.3 Fuzzy QFD...14
III FUZZY QFD IN FUZZY CRITICAL CHAIN METHOD
3.1 Introduction...29
3.2 Fuzzy Model from Fuzzy QFD...30
3.3 Buffer Time Evaluation with Fuzzy QFD...33
3.4 Summary of Fuzzy QFD Application in Fuzzy Critical Chain...35
IV APPLICATIONS OF MILITARY AIRCRAFT INSPECTION
4.1 Introduction...50
4.2 Application of Fuzzy Critical Chain with Fuzzy QFD...52
4.3 Summary...55
V SUMMARY AND CONCLUSIONS...68
REFERENCES...70
參考文獻 Azaron, A., Katagiri, H., Sakawa, M., Kato, K. and Memariani, A., “A Multi-Objective Resource Allocation Problem in PERT Networks,” European Journal of Operational Research, Vol. 172, pp. 838-854, 2006.
Azaron, A., Perkgoz, C. and Sakawa, M., “A Genetic Algorithm Approach for the Time-Cost Trade-Off in PERT Networks,” Applied Mathematics and Computation, Vol. 168, No. 2, pp. 1317-1339, 2005.
Bottani, E. and Rizzi, A., “Strategic Management of Logistics Service: A Fuzzy Quality Function Deployment Approach,” Int. J. Production Economics, Vol. 103, pp. 585-599, 2006.
Chaudhuril, A. and Bhattacharyya, M., “Linking Quality Function Deployment with Conjoint Study for New Product Development Process,” IEEE International Conference on Industnial Informatics, pp. 396-401, 2005.
Chen, C. T. and Huang, S. F., “Applying Fuzzy Method for Measuring Criticality in Project Network,” Information Sciences, Vol. 177, No. 12, pp. 2448-2458, 2007.
Chen, Y., Fung, R. Y. K., and Tang, J., “Rating Technical Attributes in Fuzzy QFD by Integrating Fuzzy Weighted Average Method and Fuzzy Expected Value Operator,” European Journal of Operational Research, No. 174, pp. 1553-1566, 2006.
Chen, M. K. and Hsu, S. P., “Fuzzy-Critical-Chain-Based Project Management,” Journal of the Chinese Institute of Industrial Engineer, Vol. 21 No. 2, pp.167-176, 2004.
Chen, A. T. and Leu, S. S., “Studies on Optimal Fuzzy Scheduling for Construction Projects,” Master Thesis, National Taiwan University of Science and Technology, Taipei, Taiwan R.O.C., 1997.
Chen, J. X. and Xu, S. M., “An Improved FPERT,” Master Thesis, National Taiwan University of Science and Technology, Taipei, Taiwan R.O.C., 1995.
Ching, S. J. and Tseng, T. Y., “A Study on Fuzzy PERT and the Related Issues,” Master Thesis, Tunghai University, Taichung, Taiwan R.O.C., 1994.
Cristiano, J. J., Liker, J. K. and White, C. C., “Key Factors in the Successful Application of Quality Function Deployment (QFD),” IEEE Trans. on Engineering Management, Vol. 48, No. 1, pp. 81-95, 2001.
Dubois, D. and Prade, H. M., Fuzzy sets and systems: theory and applications, Mathematic in Science and Engineering, Academic press, Vol. 144, 1980.
Goldratt, E. M., Critical Chain, The North River Press Publishing Corporation, 1997.
Herzwurm, G., Schockert, S and Pietsch, W., “QFD for Customer-Focused Requirements Engineering,” IEEE International Requirements Engineering Confidence, 2003.
Hsueh, M. C. and Wei, N. C., “Applying Critical Chain Project Scheduling for Airplane Maintenance,” Master Thesis, I-Shou University, Kaohsiung, Taiwan R.O.C., 2007.
Huang, J. Y., Jen, W. and Kuo, H. K., “Applying Critical Chain Project Scheduling for Civil Aircraft Engine Maintenance Business,” Master Thesis, National Chiao Tung University, Hsinchu, Taiwan R.O.C., 2004.
Iranmanesh, S. H., Thomson, V. and Salimi, M. H., “Design Parameter Estimation Using a Modified QFD Method to Improve Customer Perception,” Concurrent Engineering: Research and Applications, Vol. 13, No. 1, pp. 57-67, 2005.
Kahraman, C., Ertay, T. and Büyüközkan, G., “A Fuzzy Optimization Model for QFD Planning Process Using Analytic Network Approach,” European Journal of Operational Research, Vol. 171, pp. 390-411, 2006.
Kaufmann, A., and Gupta, M. M., Induction to fuzzy arithmetic: theory and applications, Van Nostrand Reinhold Company, 1985.
Li, K. and Chen, Y. X., “Applying Critical Chain in Project Scheduling and Estimating Buffer Size Based on Fuzzy Technique,” International Journal of Project Management, pp. 688-698, 2007.
Lin, V. and Shyur, H. J., “A Critical Chain Based Heuristic Model for Multiple Projects Scheduling,” Master Thesis, Tamkang University, Taipei, Taiwan R.O.C., 2004.
Lin, M. C., Wang, C. C. and Chen, T. C., “A Strategy for Managing Customer-Oriented Product Design,” Concurrent Engineering: Research and Applications, Vol. 14, No. 3, pp. 231-244, 2006.
Lin, M. C., Tsai, C. Y., Cheng, C. C., and Chang, C. A., “Using Fuzzy QFD for Design of Low-End Digital Camera,” International Journal of Applied Science and Engineering, Vol. 2, No. 3, pp.222-233, 2004.
Liu, S. T., “Fuzzy Activity Times in Critical Path and Project Crashing Problems,” Cybernetics and Systems, Vol. 34, No. 2, pp. 161-172, 2003.
Long, L. D. and Ohsato, A., “Fuzzy Critical Chain Method for Project Scheduling under Resource Constraints and Uncertainly,” International Journal of Project Management, pp. 688–698, 2008.
Mattioda, D., “Use of Critical Chain Scheduling to Increase Aircraft Availability,” Department of The Air Force Air University, Air Force Institute of Technology, 2002.
Mummolo, G., “Measuring Uncertainty and Criticality in Network Planning by PERT-Path Technique,” International Journal of Project Management, Vol. 15, No. 6, pp. 377-387, 1997.
Shillito, M. L., Advanced QFD, John Wiley & Sons, 1994.
Sivaloganathan, S. and Evbuomwan, N. F. O., “Quality Function Deployment-The Technique: State of The Art and Future Direvtions,” Concurrent Engineering: Research and Applications, Vol. 5, No. 2, pp. 171-181, 1997.
Sohn, S. Y. and Choi, I. S., “Fuzzy QFD for Supply Chain Management with Reliability Consideration,” Reliability Engineering and System Safety, Vol. 72, pp. 327-334, 2001.
Sung, N. H., and Chang, S. H., “The Research of Critical Chain Methodology in Different Project Environment,” Master Thesis, Mingshin University of Science and Technology, Hsinchu, Taiwan R.O.C., 2006.
Tang, L. M. J. and Chen, Y., “A Multi-Objective Fuzzy Model of QFD Product Planning Model Considering Nonlinear Relationship,” IEEE, pp. 5102-5105, 2007.
Tsai, C. Y., Lo, C. C. and Chang, A. C., “Using Fuzzy QFD to Enhance Manufacturing Strategic Planning,” Journal of the Chinese Institute of Industrial Engineers, Vol. 18, No. 3, pp. 33-41, 2003.
Tsuda, Y., “Concurrent Engineering Case Studies Appling QFD Models,” Concurrent Engineering: Research and Applications, Vol. 5, No. 4, pp. 337-345, 1997.
Wang, T. K., and Tan, M., “The Research of Factors Affecting Consumption of Project Buffer under Critical Chain,” Master Thesis, National Defense University, Taoyuen, Taiwan R.O.C., 2003.
Yung, K. L., Ko, S. M., Kwan, F. Y., Tam, H. K., Lam, C. W., Ng, H. P. and Lau, K. S., “Application of Function Deployment Model in Decision Making for New Product Development,” Concurrent Engineering: Research and Applications, Vol. 14, No. 3, pp. 257-267, 2006.
Zhao, Z. Y., You, W. Y., and Lv, Q. L., “Application of Fuzzy Critical Chain Method in Project Scheduling,” Fourth International Conference on Natural Computation, pp. 473-447, 2008.
論文全文使用權限
  • 同意授權校內瀏覽/列印電子全文服務,於2010-06-19起公開。
  • 同意授權校外瀏覽/列印電子全文服務,於2010-06-19起公開。


  • 如您有疑問,請聯絡圖書館
    聯絡電話:(06)2757575#65773
    聯絡E-mail:etds@email.ncku.edu.tw