進階搜尋


 
系統識別號 U0026-0812200913454475
論文名稱(中文) 統一化結構創意思考方法於綠色創新的應用
論文名稱(英文) Eco-Innovation by Using Unified Structured Inventive Thinking
校院名稱 成功大學
系所名稱(中) 機械工程學系碩博士班
系所名稱(英) Department of Mechanical Engineering
學年度 95
學期 2
出版年 96
研究生(中文) 王杰烽
研究生(英文) Jie-fong Wang
電子信箱 n1694151@mail.ncku.edu.tw
學號 n1694151
學位類別 碩士
語文別 中文
論文頁數 63頁
口試委員 指導教授-陳家豪
口試委員-施勵行
口試委員-黃金沺
中文關鍵字 環境效率要素  產品設計  綠色創新設計 
英文關鍵字 product design  eco-innovation design  USIT  TRIZ  eco-innovation  eco-efficiency elements 
學科別分類
中文摘要 摘要 TRIZ中的小人法傳入以色列後,發展出SIT方法,而後SIT方法傳到美國,又產生USIT方法,譯做統一化結構創意方法。USIT方法讓使用者更細微地注意問題牽涉的事物,為尋求解答不放過任何變化,並且力求廣泛適用於各學門。本文將USIT方法應用於綠色創新設計,提出環境效率要素之綠色設計守則與工程參數對照表來輔助使用者收集與取捨資訊,配合USIT方法原有的基礎建立綠色創新之USIT方法設計流程,第一階段定義問題要收集資訊與描述問題,第二階段分析問題使用注重物體-屬性-功能的閉世界法或從小人法改良而來的粒子法,第三階段利用五項解答技巧產生解答,希望協助設計者開發低環境衝擊與高創新價值的產品。為了驗證此一設計方法,本文依所提出的綠色創新之USIT設計流程,提出新的主動拆卸扣件、計程車空轉問題、簡化結構的牙線棒等三項案例。
英文摘要 ABSTRACT After “smart little people”, a concept of TRIZ, has been introduced to Israel, SIT methodology was developed. Soon after SIT methodology was introduced to USA, USIT methodology was developed. USIT methodology makes users focus on the problem in greater details and not pass over any possible change for the solutions. USIT strives to be applicable in many disciplines. This thesis applies USIT to eco-innovation, and proposes the links between the WBCSD (World Business Council for Sustainable Development) eco-efficiency elements, green design principles and engineer parameters to help designers collect and cull information. This thesis also combines the above-mentioned links with the original foundation of USIT to establish an eco-innovation USIT design process. In the first phase, problem definition, it is necessary to collect information which is sorted and transformed into a problem statement. In the second phase, problem analysis, the designers can apply either or both of the USIT solution methods, the Close-World Method which focuses on objects, attributes, and functions and the Particles Method which is improved from the smart little people method. In the third phase, solution generator, solutions are discovered while applying five solution techniques. The eco-innovation USIT design process proposed in this thesis is conducive to designers to develop lower environmental impact and higher innovative products. For demonstrating the proposed process, three cases: the new active disassembly fastener, the idle taxi, the simplified structure dental floss brush are solved, according to the proposed process.
論文目次 目錄
中文摘要...............................................i
英文摘要..............................................ii
誌謝..................................................iv
目錄...................................................v
表目錄..............................................viii
圖目錄................................................ix
第一章 緒論................................... ...... 1
1.1 背景.............................................. 1
1.2 文獻回顧...........................................2
1.3 研究目的...........................................5
1.4 本文架構...........................................6
第二章 USIT 方法.......................................7
2.1 USIT 方法概述......................................7
2.2 USIT 方法定義問題階段............................. 9
2.3 USIT 方法分析問題階段.............................12
2.3.1 閉世界法........................................12
2.3.2 粒子法..........................................18
2.4 USIT 方法產生解答階段............................ 21
2.4.1 獨特性..........................................21
2.4.2 維度............................................22
2.4.3 物體數..........................................23
2.4.4 改變功能分布....................................23
2.4.5 轉化........................................... 24
2.5 USIT 方法的特色與優缺點...........................26
第三章 USIT 方法應用在綠色創新........................28
3.1 綠色設計守則與環境效率要素........................28
3.2 環境效率要素之綠色設計守則與工程參數對照表....... 29
3.3 綠色創新之USIT 方法設計流程...................... 32
第四章 實例應用.......................................37
4.1 主動拆解的扣件....................................37
4.2 計程車空轉問題....................................41
4.3 牙線棒問題........................................45
第五章 結論與建議.....................................53
5.1 結論..............................................53
5.2 建議..............................................54
參考文獻..............................................57
參考文獻 參考文獻
Brezet, J.C., Bijma, A. and Silvester, S., “Innovative Electronics as an Opportunity for Eco-efficient Services,” Proceedings of Electronics Goes Green 2000 conference, Berlin, Germany, 2000.
Chang, H.-T. and Chen, J. L., “An Eco-Innovative Design Method Based on Design-around Approach,” Third International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Ecodesign03, Tokyo, Japan, December 8-11, 2003a.
Chang, H.-T. and Chen, J. L., “Eco-Innovative Examples for 40 TRIZ Inventive Principles,” The TRIZ Journal, August, 2003b.
Chang, H.-T. and Chen, J. L., “The Conflict-Problem-Solving CAD Software Integrating TRIZ into Eco-Innovation,” Journal of the Advance in Engineering Software, Vol. 35, pp. 553-566, 2004.
Chen, J. L. and Andrew, H. L., “A Life Cycle Concept Based Eco-Innovative Method by TRIZ Tools,” Proceedings of Going Green-Care Innovation 2006, November 13-15, Vienna, 2006.
Chen, J. L. and Liu, C.-C., “An Eco-Innovative Design Approach Incorporating the TRIZ Method without Contradiction Analysis,” Journal of Sustainable Product Design, Vol. 1, No. 4, pp. 263-272, 2001.
Chen, J. L. and Liu, C.-C., “Green Innovation Design of Products by TRIZ Inventive Principles and Green Evolution Rules,” 2002 International CIRP Design Seminar, Hong Kong, May 16-18, 2002.
Chen, J. L. and Liu, C.-C., “An Eco-Innovative Design Method by Green QFD and TRIZ Tools,” Proceedings of 14th the International Conferences on Engineering design, ICED03, Stockholm, Sweden, August 19-21, 2003.
Chen, J. L., “Green Evolution Rules and Ideality Laws for Green Innovative Design of Products,” Proceedings of Going Green Care Innovation 2002, Vienna, November 25-28, 2002.
DeSimone, L. D. and Popoff, F., Eco-efficiency -The Business Link to Sustainable Development, The MIT Press, 1997.
Jones, E. and Harrison, D., “Investigating the Use of TRIZ in Eco-Innovation,” The TRIZ Journal, September, 2000. (http://www.trizjournal.com)
Jones, E., Harrison, D. and Mclaren, J., “Managing Creative Eco-Innovation Structuring Outputs from Eco-Innovation Projects,” The Journal of
Sustainable Product Design, No. 1, pp. 27-39, 2001.
Jones, E., Harrison, D. and Stanton, N. A., “The Application of TRIZ Tools in an Eco-Innovation Process,” Proceedings of World Conference on TRIZ Future 2001, Bath, UK, pp. 57-78, 2001a.
Jones, E., Harrison, D. and Stanton, N. A., “An Eco-Innovation Case Study of Domestic Dishwashing through the Application of TRIZ Tools,” Creativity and Innovation Management, Vol. 10, No. 1, pp. 3-14, 2001b.
Jones, E., Stanton, N. A. and Harrison, D., “Applying Structured Methods to Eco-Innovation. An Evaluation of the Product Ideas Tree Diagram,”Design Studies, No. 22, pp. 519-542, 2001.
Liu, C-C and Chen, J. L., “Development of Product Green Innovation Design Method,” Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Ecodesign01, Tokyo, Japan, December 12-15, 2001.
Liu, C-C and Chen, J. L., “Inventive Principles and Evaluation Method for Eco-Innovative Design,” Third International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Ecodesign03, Tokyo, Japan, December 8-11, 2003.
Mann, D. and Jones, E., “Sustainable Services & Systems through Systematic Innovation Method,” 6th Towards Sustainable Product Design Conference, Amsterdam, Netherlands, October 29-30, 2001.
Mann, D., “Systematic Sustainable Innovation,” Sustainable Innovation 03:
Creating Sustainable Products, Services and Product-Service-System,
Towards Sustainable Product Design, 8th International Conference, October, 27-28, Stockholm, Sweden, 2003.
Mann, D., Dewulf, S., Zlotin, B. and Zusman, A., Matrix 2003-Updating the
TRIZ Contradiction Matrix, Creax, Belgium, 2003.
Nakagawa, T., “Experiences of Teaching and Applying the Essence of TRIZ with Easier USIT Procedure,” Proceedings of TRIZCON2002: Fourth Annual Altshuller Institute for TRIZ Studies International Conference,
St.Louis, Missouri, April 28-30, 2002.
Nakagawa, T., “Problem Solving Methodology for Innovation TRIZ USIT. Its Philosophy, Methods, Knowledge Bases, and Software Tools,” First
Symposium on Knowledge Creation Support Systems, at JAIST
(Advanced Institute of Science and Technology, Hokuriku) near
Kanazawa, February 27-28, 2004a.
Nakagawa, T., “USIT Operators for Solution Generation in TRIZ: Clearer Guide to Solution Paths,” ETRIA TRIZ Future 2004 Conference, Florence, Italy, November 3-5, 2004b.
Nakagawa, T., Kosha H. and Mihara Y., “USIT Solution Generation Methods (Extended Version) - Simplified System by the Reorganization of TRIZ
Solution Generation Methods,” Extended Version of the Appendix to “Reorganizing TRIZ Solution Generation Methods into Simple Five in USIT” ETRIA World Conference: TRIZ Future 2002, Strasbourg, France, November 6-8, 2002.
Roseman, B., “Hidden Patterns of Innovetive Environmental Designed Products,” Proceedings of 14th the International Conferences on Engineering design, ICED03, Stockholm, Sweden, August 19-21, 2003.
Sickafus, N. E., Unified Structured Inventive Thinking- How to Invent, Ntelleck, Grosse Ile, MI, USA, 1997.
Sickafus, N. E., “A Simple Theory Underlying Structured Problem-Solving Methodologies-ASIT, TRIZ, USIT (and others),” The Second TRIZ Symposium in Japan, Pana-Hills Osaka, Suita City, Osaka, Japan, August 31 - Sept. 2, 2006.
Yen, S.-B. and Chen, J. L., “An Eco-Innovative Tool by Integrating FMEA and TRIZ Methods,” Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Ecodesign05, Tokyo, Japan, December 11-14, 2005.
吳信如譯,(Hawken, P. ,Lovins, A., and Lovins, L. H.原著),綠色資本主義:創造經濟雙贏的策略,天下雜誌,台北市,2002。
張祥唐,整合TRIZ 與可拓方法之綠色創新設計研究,國立成功大學機械工程學系博士論文,2004。
陳旺志,聰敏扣件之設計方法研究,國立成功大學機械工程學系碩士論文,2006。
陳振泉,“牙線器”,中華民國新型專利第281601 號,2005。
陳瑞彬,以網際網路為基礎之電腦輔助產品綠色設計系統之研究,國立成功大學機械工程學系碩士論文,2001。
楊致行,王壬,林敬智,許順珠,環境化設計技術手冊,經濟部工業局,台北市,2003。
劉志成,TRIZ 方法改良與綠色創新設計方法之研究,國立成功大學機械工程學系博士論文,2003。
劉志成、陳家豪,“TRIZ 創新法則於綠色創新設計的應用”,工業污染防治季刊,第85 期,pp. 164-174,2003。
劉宜旺,從產品生命週期階段觀點提出改良的TRIZ 為基礎之綠色創新設計方法研究,國立成功大學機械工程學系碩士論文,2005。
鄭源錦,綠色設計手冊,中華民國對外貿易發展協會,台北,1995。
蕭詠今,創意快閃-TRIZ 大思維,台海文化傳播事業有限公司,台北縣,2006。
顏妹,整合生命週期評估與環保化設計於產品設計之研究,國立成功大學機械工程學系碩士論文,1999。
相關網址1 行政院環境保護署國際重要環保條約彙整,
http://web.epa.gov.tw/b/b0100.asp?Ct_Code=03X0000138X0001327 ,
first accessed April 2007。
相關網址2 財團法人工業技術研究院,
http://college.itri.org.tw/SeminarView.aspx?no=23060395&msgno=30107
4,first accessed April 2007。
相關網址3 東森新聞報,http://www.ettoday.com/2007/05/29/334-
2103845.htm,first accessed May 2007。
相關網址4 賴明伸,綠色消費電子報,
http://www.edf.org.tw/News/green20040309.htm,first accessed Oct 2006。
相關網址5 莫聞,環境資訊電子報,台灣環境資訊協會環境資訊中
心,http://e-info.org.tw/node/17038,2006.11.28,first accessed Nov 2006。
相關網址6 金羊網,
http://www.southcn.com/lady/ftequ/fcare/200509210041_1119928.jpg,
first accessed May 2007。
相關網址7 愛麗絲牙線刷,http://www.fullwing.com.tw/tmerit.htm,first
accessed May 2007。
論文全文使用權限
  • 同意授權校內瀏覽/列印電子全文服務,於2007-07-20起公開。
  • 同意授權校外瀏覽/列印電子全文服務,於2007-07-20起公開。


  • 如您有疑問,請聯絡圖書館
    聯絡電話:(06)2757575#65773
    聯絡E-mail:etds@email.ncku.edu.tw