T. W. Shen, K. C. Chang, C. M. Sun, W. Fang, “Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design,” Journal of Micromechanics and Microengineering, Vol. 29, Issue 2, 025007, 2019.
 S. H. Wang, “Development of a Thermoelectric Energy Generator with Double Cavity Design by Standard CMOS Process for Higher Performance,” Master Thesis, National Cheng Kung University, Taiwan, 2019.
 P. V. Mane-Deshmukh, D. M. Adat, B. P. Ladgaonak, S. K. Tilekar, “Monitoring and Control of Gas Leakages of Industrial Sector Using PIC 18F4550, Zigbee and Wireless Sensor Actuator Network,” Journal on Electronics Engineering, Vol. 8l No. 3l, 2018.
 T. Zhang, R. R. Xu, Y. W. Zhang, D. Q. Meng, “Design of Storage and Monitoring System for Medical Dangerous Chemicals Based on Wireless Sensor Network,” IOP Conference Series: Materials Science and Engineering, Vol. 692, 2019.
 D. Y. Zou, S. Y. Chen, S. Han, W. X. Meng, D. An, J. Q. Li, W. L. Zhao, “Design of a Practical WSN Based Fingerprint Localization System,” Mobile Networks and Applications, pp. 806–818, 2019.
 B. H. Curtin, R. H. David, E. D. Dunham, C. D. Johnson, N. Shyamkumar, T. A. Babbitt, S. J. Matthews, “Designing a Raspberry Pi Sensor Network for Remote Observation of Wildlife,” HotSoS '19: Proceedings of the 6th Annual Symposium on Hot Topics in the Science of Security, No. 17, pp. 1-2, 2019.
 S. A. Katyayan, D. W. Wajgi, R. D. Wajgi, “A Clustering Based Approach to Provide Security to Wireless Sensor Network,” 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), pp. 1203-1208, 2018.
 S. Ullo, M. Gallo, G. Palmieri, P. Amenta, M. Russoy, G. Romanoz, M. Ferrucciz A. Ferrarax, M. De Angelis, “Application of Wireless Sensor Networks to Environmental Monitoring for Sustainable Mobility,” 2018 IEEE International Conference on Environmental Engineering, pp. 1-7, 2018.
 T. Heiduk, A. M. Thike, P. S. Excell, A. Osanlou, “A Wearable Wireless Sensor Network Node for Prevention of Physical Injuries,” Annals of Emerging Technologies in Computing, Vol. 3, No. 3, pp. 9-18, 2019.
 C. Jayawickrama, S. Kumar, S. Chakrabartty, H. Song, “A Novel Chaotic Modulation Approach of Packaged Antenna for Secured Wireless Medical Sensor Network in E‐healthcare Applications,” Microwave and Optimal Technology Letters, Vol. 62, Issue 2, pp. 933-942, 2020.
 E. Kordetoodeshki, A. Hassanzadeh, “Design of Low Voltage Low Power DC-DC Converters Using Adiabatic Technique,” Journal of Circuits, Systems and Computers, Vol. 27, 1850094, 2018.
 W. Lai, S. Jang, C. Huang, M. Juang, “Fully-Integrated CMOS DC-DC Boost Converter,” 2019 IEEE Asia Power and Energy Engineering Conference, pp. 84-88, 2019.
 Y. Hsu, Y. Lin, J. Lin, H. Chiu, “A Ripple-Based DC-DC Buck Converter with Random Switching Frequency,” 2019 4th International Conference on Intelligent Green Building and Smart Grid, pp. 72-75, 2019.
 S. M. Yang, T. Lee, C. A. Jeng, “Development of a Thermoelectric Energy Harvester with Thermal Isolation Cavity by Standard CMOS Process,” Sensors and Actuators A: Physical, Vol. 153, pp. 244-50, 2009.
 S. M. Yang, T. Lee, M. Cong, “Design and Verification of a Thermoelectric Energy Harvester with Stacked Polysilicon Thermocouples by CMOS Process,” Sensors and Actuators A: Physical, Vol. 157, pp. 258-66, 2010.
 J. Xie, C. Lee, H. Feng, “Design Fabrication and Characterization of CMOS MEMS-based Thermoelectric Power Generators,” Journal of Microelectromechanical Systems, Vol. 19, pp. 317-24, 2010.
 P. H. Kao, P. J. Shih, C. L. Dai, M. C. Kiu, “Fabrication and Characterization of CMOS-MEMS Thermoelectric Micro Generator,” Sensors, Vol. 10, pp. 1315-25, 2010.
 X. Yu, Y. Wang, Y. Liu, T. Li, H. Zhou, X. Gao, F. Feng, T. Roinila, Y. Wang, “CMOS MEMS-based Thermoelectric Generator with an Efficient Heat Dissipation Path,” Journal of Micromechanics and Microengineering, Vol. 22, 105011, 2012.
 S. W. Peng, P. J. Shih, C. L. Dai, “Manufacturing and Characterization of a Thermoelectric Energy Harvester Using the CMOS-MEMS Technology,” Micromachines, Vol. 6, pp. 1560-68, 2015.
 E. F. Sawires, M. I. Eladawy, Y. I. Ismail, H. Abdelhamid, “Thermal Resistance Model for Standard CMOS Thermoelectric Generator,” IEEE Access, Vol. 6, pp. 8123-32, 2018.
 R. Roth, R. Rostek, K. Cobry, C. Kohler, M. Groh, P. Woias, “Design and Characterization of Micro Thermoelectric Cross-Plane Generators with Electroplated and Reflow Soldering,” Journal of Microelectromechanical Systems, Vol. 23, pp. 961-71, 2014.
 J. P. Carmo, L. M. Goncalves, J. H. Correia, “Thermoelectric Microconverter for Energy Harvesting Systems,” IEEE Transactions on Industrial Electronics, Vol. 57, pp. 861-67, 2010.
 X. Yu, Y. Wang, Y. Liu, T. Li, H. Zhou, X. Gao, F. Feng, T. Roinila, Y. Wang, “Design and Fabrication of MEMS Thermoelectric Generators with High Temperature Efficiency,” Sensors and Actuators A: Physical, Vol. 145-46, pp. 423-29, 2008.
 M.D. Chen, J.Y. Wang, S.M. Yang, M.H. Tsai, “Structural Design for Dimensional Stability of Thermocouples in Thermoelectric Energy Harvester,” IEEE Sensors Journal, Vol. 19, pp. 58-64, 2019.
 M. Boutchich, K. Ziouche, P. Godts, D. Leclercq, “Characterization of Phosphorus and Boron Heavily Doped LPCVD Polysilicon Films in the Temperature Range 293-373 K,” IEEE Electron Device Letters, Vol. 23, No. 3, pp. 139-41, 2002.
 C. Lee, J. Xie, “Design and Optimization of Wafer Bonding Packaged Microelectromechanical Systems Thermoelectric Power Generators with Heat Dissipation Path,” Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, Vol. 27, pp. 1267-71, 2009.
 N. Wojtas, E. Schwyter, W. Glatz, S. Kühne, W. Escher, C. Hierold, “Power Enhancement of Micro Thermoelectric Generators by Microfluidic Heat Transfer Packaging,” Sensors and Actuators A: Physical, Vol. 188, pp. 389-395, 2011.
 H. B. Lee, H. J. Yang, J. H. We, K. Kim, K. C. Choi, B. J. Cho, “Thin-Film Thermoelectric Module for Power Generator Applications Using a Screen-Printing Method,” Journal of Electronic Materials, Vol. 40, No. 5, pp. 615-19, 2011.
 D. Xu, B. Xiong, G. Wu, Y. Ma, E. Jing, Y. Wang, “3D Monolithic Integrated Thermoelectric IR Sensor,” Sensors, IEEE, pp. 1-4, 2012.
 W. Wang, Y. Ji, H. Xu, H. Li, T. Visan, F. Golgovici, “A High Packing Density Micro-Thermoelectric Power Generator Based on Film Thermoelectric Materials Fabricated by Electrodeposition Technology,” Surface and Coatings Technology, Vol. 231, pp. 583-589, 2013
 M. Chen, G. J. Snyder, “Analytical and Numerical Parameter Extraction for Compact Modeling of Thermoelectric Coolers,” International Journal of Heat and Mass Transfer, Vol. 60, pp. 689-99, 2013.
 O. Sullivan, M. P. Gupta, S. Mukhopadhyay, S. Kumar, “On-Chip Power Generation Using Ultrathin Thermoelectric Generators,” Journal of Electronic Packaging, Vol. 137, pp. 0110051-57, 2014.
 A. Hilton, D. S. Temple, “Wafer-Level Vacuum Packaging of Smart Sensors,” Sensors, Vol. 16, pp. 1819, 2016.
 K. Ziouche, Z. Yuan, P. Lejeune, T. Lasri, D. Leclercq, Z. Bougrioua, “Silicon-Based Monolithic Planar Micro Thermoelectric Generator Using Bonding Technology,” Journal of Microelectromechanical Systems, Vol. 26, pp. 45-47, 2017.
 S. M. Hu, “Critical Stress in Silicon Brittle Fracture, and Effect of Ion Implantation and Other Surface Treatments,” Journal of Applied Physics, Vol. 53, pp. 3576-80, 1982.